1.Application: to manufacture different kinds/shapes/density of EPS(Expanded Polystyrene) foam products which is used in building, insulation, packaging, refrigeration, daily necessities, industrial casting insulation material of wall and floor heating and other fields.
2.Basic datas:
|
Model number
|
K1214S
|
|
*Steam chamber dimension
|
1200x1400mm
|
|
*Max moulding area
|
1050x1250mm
|
|
*Max thickness product
dimension
|
350mm
|
3.Other advantages
- Use two halves type axle sleeve and bearing shells, the material of bearing shell is oil contained nylon, which is easy to have lubrication and exchange
- With more large-diameter inlet steam pipes, to achieves evenly heating.
- Symmetrical hydraulic cylinder use propelling mould-locking, easy to move and short the time of open/close the mould.
- Equipment control system use full digital proportional control, having an precise control of production energy consumption.
- Using big diameter valve can offer enough supplying capacity in an instant, to short the cycle time.
- Steam room use special Thermal insulation material; realize the insulation, heat insulation of cavity.
- Adding an insulation plate, to avoid the steam directly touch with the mould, to keep temperature and insulation, to reduce the steam consumption, as the material of mould is usually aluminum.
- Can be equipped with Central vacuum system, usually one unit for one line(about 10 units of shape moulding machine),only need 4 pieces of vacuum pump, which can reduce the installing power for whole plant.
- The main rod can be disassembled independently.
